YANG Ning, DU Shuai. RESEARCH ON OPTIMIZATION DESIGN OF SECTION PARAMETERS OF SPECIAL SECTION PILE[J]. MECHANICS IN ENGINEERING, 2022, 44(1): 109-115. DOI: 10.6052/1000-0879-21-263
Citation: YANG Ning, DU Shuai. RESEARCH ON OPTIMIZATION DESIGN OF SECTION PARAMETERS OF SPECIAL SECTION PILE[J]. MECHANICS IN ENGINEERING, 2022, 44(1): 109-115. DOI: 10.6052/1000-0879-21-263

RESEARCH ON OPTIMIZATION DESIGN OF SECTION PARAMETERS OF SPECIAL SECTION PILE

More Information
  • Corresponding author:

    DU Shuai

  • Received Date: June 27, 2021
  • Revised Date: August 17, 2021
  • Published Date: February 07, 2022
  • Special shaped section piles are used to improve the load carrying capacity of high-rise buildings. In order to achieve optimal design, it is necessary to categorize and analyze the important structural parameters that affect the mechanical properties, and it is also necessary to find out the trend and optimal solution of the load carrying capacity of special shaped section pile for various different structural parameters. In this paper, we use parametric analysis of special shaped section piles to investigate the influence of different cross-section parameters on the mechanical properties of such piles by changing the number and angle of external cusps. The results show that the vertical bearing capacity and lateral bending resistance of special shaped section piles are better than those of pipe piles with the same cross-sectional area, and that the concave section piles are better than the convex section piles.
  • [1]
    崔新壮, 张娜, 王聪 等. 黄河三角洲改性含盐水泥土搅拌桩耐久性研究. 建筑材料学报, 2013, 16(3): 481-486

    Cui Xinzhuang, Zhang Na, Wang Cong, et al. Durability of salty soil-cement mixed pile in the Yellow River Delta. Journal of Building Materials, 2013, 16(3): 481-486 (in Chinese)
    [2]
    王新泉, 陈永辉, 张世民 等. 反拱曲面X形异形桩产生附加应力计算方法研究. 工程力学, 2012, 29(12): 220-227

    Wang Xinquan, Chen Yonghui, Zhang Shimin, et al. Study on calculation methods of additional stress of X-section abnormity pile with inverted arch surface. Engineering Mechanics, 2012, 29(12): 220-227 (in Chinese)
    [3]
    魏作安, 周永昆, 万玲 等. 抗滑桩与滑体之间土拱效应的理论分析. 力学与实践, 2010, 32(3): 57-61

    Wei Zuo'an, Zhou Yongkun, Wan Ling, et al. Theoretical analysis of soil arching effect between anti slide pile and sliding body. Mechanics in Engineering, 2010, 32(3): 57-61 (in Chinese)
    [4]
    祁生文, 郑惜平, 孙进忠. 夯扩异形桩施工振动效应分析. 工程地质学报, 2001(3): 326-330

    Qi Shengwen, Zheng Xiping, Sun Jinzhong. Study on vibration effect induced by tamped pile construction. Journal of Engineenng Geology, 2001(3): 326-330 (in Chinese)
    [5]
    吕亚茹, 刘汉龙, 王明洋 等. 异形桩桩土荷载传递机理理论分析. 岩土工程学报, 2015, 37(S1): 212-217

    Lü Yaru, Liu Hanlong, Wang Mingyang, et al. Theoretical analyses of load transfer mechanism for special pile foundations. Chinese Journal of Geotechnical Engineering, 2015, 37(S1): 212-217 (in Chinese)
    [6]
    孔纲强, 曹兆虎, 周航 等. 极限荷载下纵向截面异形桩破坏形式对比模型试验研究. 岩土力学, 2015, 36(5): 1333-1338

    Kong Gangqiang, Cao Zhaohu, Zhou Hang, et al. Comparative model tests on failure modes of piles with a variable longitudinal section under ultimate load. Rock and Soil Mechanics, 2015, 36(5): 1333-1338 (in Chinese)
    [7]
    国家建筑标准设计图集04G361预制钢筋混凝土方桩. 北京: 中国计划出版社, 2008

    National building standard design drawing set 04G361 prefabricated reinforced concrete square pile. Beijing: China Planning Press, 2008 (in Chinese)
    [8]
    新泉, 陈永辉, 刘汉龙. Y型桩桩端阻力产生附加应力的分析计算. 岩土力学, 2009, 30(12): 3837-3845, 3850

    Wang Xinquan, Chen Yonghui, Liu Hanlong. Analysis and calculation of additional stress in foundation soil due to tip resistance of Y-shaped vibro-pile. Rock and Soil Mechanics, 2009, 30(12): 3837-3845, 3850 (in Chinese)
    [9]
    建筑地基基础设计规范GB50007-2017. 北京: 中国建筑工业出版社, 2017

    Code for design of building foundation GB50007-2017. Beijing: China Architecture & Building Press, 2017 (in Chinese)
    [10]
    孙训方, 方孝淑, 关来泰. 材料力学(I), 第6版. 北京: 高等教育出版社, 2019

    Sun Xunfang, Fang Xiaoshu, Guan Laitai. Material Mechanics (I), 6th edn. Beijing: Higher Education Press, 2019 (in Chinese)
  • Related Articles

    [1]ZHANG Feifan, ZHANG Yu, YAO Shuang, CHU Weipeng. INVESTIGATION OF THE MECHANICAL PROPERTIES FOR OFFSHORE LCO2 FLOATING HOSE[J]. MECHANICS IN ENGINEERING, 2024, 46(3): 522-531. DOI: 10.6052/1000-0879-23-635
    [2]LI Yunpeng, FENG Panxue, FENG Chun, ZHANG Yiming. STUDY ON ROCK BREAKING MECHANISM OF BUNDLE-HOLE CUT BLASTING[J]. MECHANICS IN ENGINEERING, 2023, 45(1): 90-99. DOI: 10.6052/1000-0879-22-137
    [3]MENG Zeng, WANG Xuan, ZHOU Huanlin. DISCUSSION ON STATICALLY INDETERMINATE BEAM OF EQUAL STRENGTH IN MECHANICS OF MATERIALS FROM OPTIMAL DESIGN THEORY[J]. MECHANICS IN ENGINEERING, 2022, 44(6): 1394-1398. DOI: 10.6052/1000-0879-21-580
    [4]XU Xiangxin. STUDY ON MECHANICAL PROPERTIES OF WARREN TRUSS LATTICE BASED ON PHOTOSENSITIVE RESIN[J]. MECHANICS IN ENGINEERING, 2022, 44(6): 1313-1321. DOI: 10.6052/1000-0879-22-035
    [5]ZHAO Shiyong. MECHANICAL BEHAVIORS OF SUPPORTING STRUCTURE OF FOUNDATION PIT WITH CONSIDERATION OF THE INFLUENCE OF ADJACENT BUILDING1)[J]. MECHANICS IN ENGINEERING, 2021, 43(3): 371-379. DOI: 10.6052/1000-0879-20-487
    [6]WANG Wei, ZHANG Youhong, CHANG Xinlong, HU Kuan, WANG Chunwen. QUALITY OPTIMIZATION DESIGN OF UNSYMMETRICAL LAMINATED COMPOSITE PLATES1)[J]. MECHANICS IN ENGINEERING, 2021, 43(1): 13-19. DOI: 10.6052/1000-0879-20-321
    [7]JIN Hongbo, ZHANG Zhiqiang, SONG Liang. A REVIEW OF STUDIES OF MECHANICAL PROPERTIES OF TURTLE CARAPACE 1)[J]. MECHANICS IN ENGINEERING, 2020, 42(2): 143-150. DOI: 10.6052/1000-0879-20-010
    [8]GUO Yongjian, JIANG Fei, ZHOU Hao, XIANG Xiaozhen. THE MECHANISM OF THE NEW-TYPE YIELDING BOLT[J]. MECHANICS IN ENGINEERING, 2015, 37(2): 193-196,237. DOI: 10.6052/1000-0879-14-210
    [9]WANG Li, LIU Hongbin, JU Yangy, LIU Jinhui, TIAN Kaipeiyy, GE Zhishun. THE MECHANISM OF EXPLOSIVE SPALLING OF HIGH STRENGTH AND HIGH PERFORMANCE CONCRETE EXPOSED TO ELEVATED TEMPERATURE[J]. MECHANICS IN ENGINEERING, 2014, 36(4): 403-412. DOI: 10.6052/1000-0879-13-272
    [10]LOAD TRANSFER MECHANISM OF BONDED REBARS WITH FULL-LENGTH BONDING[J]. MECHANICS IN ENGINEERING, 2010, 32(4): 27-29. DOI: 10.6052/1000-0879-lxysj2009-506
  • Cited by

    Periodical cited type(0)

    Other cited types(2)

Catalog

    Article views (316) PDF downloads (97) Cited by(2)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return