HU Hengshan, SONG Yongjia. CONDITIONS FOR THE APPLICATION OF THE STRESS TRANSFORMATION FORMULA 1)[J]. MECHANICS IN ENGINEERING, 2019, 41(4): 445-448. DOI: 10.6052/1000-0879-18-486
Citation: HU Hengshan, SONG Yongjia. CONDITIONS FOR THE APPLICATION OF THE STRESS TRANSFORMATION FORMULA 1)[J]. MECHANICS IN ENGINEERING, 2019, 41(4): 445-448. DOI: 10.6052/1000-0879-18-486

CONDITIONS FOR THE APPLICATION OF THE STRESS TRANSFORMATION FORMULA 1)

  • The stress transformation formula, which is also called the Cauchy's formula for stresses on slanted surfaces, is widely used in solid mechanics. No explicit statement has been found on its limitations in application. The stresses at the sharp point of a V-shaped free-surface notch on a bar under axial loading at both ends are examined as an example. With the two intersecting surfaces being free, it is deduced from the transformation equations that the sharp point is stress free. This deduction is however contradictory to the fact that the stress concentrates near the sharp point. Clearly the stress transformation formula leads to incorrect results and thus is not valid at that sharp point. It is known that if the stress transformation formula is valid, the stress components constitute a stress tensor, but the stress at the sharp concave corner is shown to be discontinuous and double-valued. It is further pointed out that stress transformation formula is not applicable to any point where a stress component has discontinuity or lacks of uniqueness at a surface passing through that point. The tip of any crack is the case.
  • loading

Catalog

    Turn off MathJax
    Article Contents

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return