杨书申, 邵龙义. NEGRETTI采样头切割原理的动力学分析[J]. 力学与实践, 2006, 28(2). DOI: 10.6052/1000-0992-2005-101
引用本文: 杨书申, 邵龙义. NEGRETTI采样头切割原理的动力学分析[J]. 力学与实践, 2006, 28(2). DOI: 10.6052/1000-0992-2005-101
THE HYDRODYNAMIC ANALYSIS FOR CUTTING PRINCIPLE OF THE NEGRETTI SAMPLE HEAD[J]. MECHANICS IN ENGINEERING, 2006, 28(2). DOI: 10.6052/1000-0992-2005-101
Citation: THE HYDRODYNAMIC ANALYSIS FOR CUTTING PRINCIPLE OF THE NEGRETTI SAMPLE HEAD[J]. MECHANICS IN ENGINEERING, 2006, 28(2). DOI: 10.6052/1000-0992-2005-101

NEGRETTI采样头切割原理的动力学分析

THE HYDRODYNAMIC ANALYSIS FOR CUTTING PRINCIPLE OF THE NEGRETTI SAMPLE HEAD

  • 摘要: 根据两相流体动力学理论对Negretti采样头中颗粒物的运动规律进行了分析,计算了PM_10和PM_2.5采样时颗粒物的运动轨迹,通过计算讨论了气流流量、颗粒物粒径等不同情况下各种因素对颗粒物运动轨迹的影响.结果表明两相流动力学是对采样切割器中颗粒物的运动进行数值模拟的有效工具,能对采样头的设计、制造提供有力的帮助.

     

    Abstract: According to two-phase hydrodynamic theories, the motionof the aerosol particles in a Negretti sample head is analyzed in this paper.The motion trajectory of the aerosol particles during the sampling ofPM_10 and PM_2.5 is computed.The influence of various factors such as airflow flux, diameter of aerosolparticles on the movement trajectory is discussed. The results show thatthe two-phase hydrodynamics is effective in simulating the motionof aerosol particles within an impactor. It can offer a powerfulhelp for the design and manufacture of impactor.

     

/

返回文章
返回