郑拯宇. 汽车外流场数值仿真中的湍流模型分析与应用[J]. 力学与实践, 2011, 33(6): 30-34. DOI: 10.6052/1000-0879-lxysj2011-326
引用本文: 郑拯宇. 汽车外流场数值仿真中的湍流模型分析与应用[J]. 力学与实践, 2011, 33(6): 30-34. DOI: 10.6052/1000-0879-lxysj2011-326
Zhengyu Zheng. ANALYSIS AND APPLICATION OF THE TURBULENCE MODEL IN THE NUMERICAL SIMULATION OF CAR'S EXTERNAL AIR-FLOW FIELD[J]. MECHANICS IN ENGINEERING, 2011, 33(6): 30-34. DOI: 10.6052/1000-0879-lxysj2011-326
Citation: Zhengyu Zheng. ANALYSIS AND APPLICATION OF THE TURBULENCE MODEL IN THE NUMERICAL SIMULATION OF CAR'S EXTERNAL AIR-FLOW FIELD[J]. MECHANICS IN ENGINEERING, 2011, 33(6): 30-34. DOI: 10.6052/1000-0879-lxysj2011-326

汽车外流场数值仿真中的湍流模型分析与应用

ANALYSIS AND APPLICATION OF THE TURBULENCE MODEL IN THE NUMERICAL SIMULATION OF CAR'S EXTERNAL AIR-FLOW FIELD

  • 摘要: 采用较为合理的计算流体力学分析技术对汽车高速行驶时其外部气动特性进行研究. 以带有轮胎、侧后视镜以及天线等突出部件的某轿车外流场模型为研究对象,在稳态下采用RNS法中Realizable k-\varepsilon两方程湍流模型结合增强壁面函数法对不同车速工况下整车外流场进行数值仿真计算. 研究表明:沿车辆X纵向上所形成压力差是产生气动阻力的主要原因; 随车速的提高, 气动阻力的增长速度快于气动升力的增长.

     

    Abstract: A more reasonable computational fluid dynamics (CFD)analysis is carried out for the external aerodynamic characteristics of the high-speedcar in this paper. The realizable k-\varepsilon turbulence two equationsmodel of RNS methods based on the FVM (finite volume method) combined withthe enhanced wall treatment method is apllied to simulate the externalflow field of a car model with tires, side mirrors and antenna and otherprotruding parts under vehicle's different speed conditions. The resultsshow that the difference of the vehicle surface pressure along the x-directionleads to the car's aerodynamic drag; with the increased vehicle's speed, thecar's aerodynamic drag grows faster than the aerodynamic lift.

     

/

返回文章
返回