力学与实践 ›› 2014, Vol. 36 ›› Issue (4): 491-492.DOI: 10.6052/1000-0879-13-227

• 应用研究 • 上一篇    下一篇

求平行力系中心的几何方法

杜茂林, 陈国良   

  1. 解放军理工大学国防工程学院, 南京210007
  • 收稿日期:2013-05-28 出版日期:2014-08-08 发布日期:2014-02-25
  • 通讯作者: 杜茂林,E-mail:dumaolindml@163.com
  • 基金资助:
    国家自然科学基金资助项目(11372354).

GEOMETRICAL METHOD TO DETERMINE THE CENTER OF A PARALLEL FORCE SYSTEM

DU Maolin, CHEN Guoliang   

  1. Institute of National Defense Engineering, PLA University of Science and Technology, Nanjing 210007, China
  • Received:2013-05-28 Online:2014-08-08 Published:2014-02-25

摘要: 在求平行力系中心位置的过程中,要用到合力矩定理. 现有方法把合力的作用点设为平行力系中心,较难理解. 该文应用合力矩定理时,把合力作用点假设为合力作用线上任意一点,平行力系合力作用线总是通过一个固定点的物理意义非常明确.

关键词: 重心|合力矩|平行力系中心

Abstract: The moment of the resultant, equivalent force about a given point of a force system, is equal to the sum of the moment of all acting forces about the same point. This theorem is usually used to determine the center of a parallel force system. In a conventional way the acting point of the resultant is set to be the center, which is difficult to be understood. In this work, an arbitrary point on the acting line of the resultant is assumed in using the theorem. The physical meaning of the center is clear and the line of action of the resultant must always pass through a fixed point.

Key words: the center of gravity|the moment of the resultant|the center of a parallel force system

中图分类号: